no response to recv

Discussion in 'Community Support' started by imkael, Feb 9, 2015.

  1. Hello every body,

    I'm trying firmware 16.02 with soft 16.1 on my argentum . When i import image and clic print i receive a message in python window that says no response to recv, the printer doesn't print and window rate your print appears. What does i've missed ? how to correct this ? all ideas are welcome .

    Thanks in advance

    imkael
  2. I second this!

    I am having the same problem.
  3. Trent Waddington

    Trent Waddington Staff Member

    Some things to try:

    1) Is the printer connected? You should see "Connected." in the status bar at the bottom of the window.
    2) Do the lights turn on? After pressing "print" the two light strips should light up very brightly. If this doesn't happen, check to ensure your power cable is connected and the power switch is on.
    3) I pushed the 0.16.3 update this morning which may help with this issue.

    Please let us know if you're still experiencing this error.
  4. The printer is connected to the control program. I updated to the latest version.
    I can run a calibration and turn the fans and LEDs on and off, so the power is on and they are communicating but I still get the same error when trying to import an image and print.
  5. cwy

    cwy

    I am also having the same problem.
    After running print, the python window displays message:

    starting...
    Argentum init
    Software version 0.16.3+20150210
    autoConnectLoop running with port=COM6
    Latest version is 0.16.3
    Inline update url is https://www.cartesianco.com/updates/inline-0.16.3.zip
    Printer number:
    Printer is running version: 0.16.3+20150209
    compression rate 18.4927950325 to 1
    no response to recv

    Report sent.

    Latest version is 0.16.3
    Inline update url is https://www.cartesianco.com/updates/inline-0.16.3.zip
    Latest version is 0.16.3
    Inline update url is https://www.cartesianco.com/updates/inline-0.16.3.zip
    compression rate 18.4927950325 to 1
    no response to recv

    Report sent.

    Latest version is 0.16.3
    Inline update url is https://www.cartesianco.com/updates/inline-0.16.3.zip

    I check and ensure the power is on.
    Thank you very much.
  6. hello Trent,
    still the same problem with firm 0.16.3 printer is on line , avrdude have flashed correcty the firmware but nothing happen when i import image and clic print i'm mounting a kubuntu on an other computer and i'll tell you wath happen in my next message

    Attached Files:

  7. hello again , in Kubuntu 14.04.1 LTS in Sudo mode printer running quite well the trouble is under windows for the moment the printer is running a 10 pass print without trouble
  8. Ariel

    Ariel Staff Member

    That's great! We're working on fixing up the Windows software - a few people are still having trouble communicating with their printers properly.

    I'd love to see the prints you're getting

Share This Page